water-based spray paint
Features
1.Fast drying
2.Colorful and easy to use
3.Full paint film and high gloss
4.Strong adhesion
Application
It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions
Instructions
Construction environment
| Temperature of the container | +5ºC~+35ºC |
| Environment temperature | +5ºC~+35ºC |
| Environment relative humidity | 30%~75% |
Remark: the best material liquid temperature is +20 ºC, environment humidity less than 60%. If the temperature and humidity exceed the specified range, the temperature and humidity should be reworked within the suitable range.
Base material to prepare
Clean the oil, dust and water stains thoroughly before use, and polish or spray primer on the base material if necessary.
Usage
Before use, you must shake up, down, left, and right, and continue to shake the can for about 2 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.
1.First spray on a small area of the test panel to confirm the accuracy of the selected color;
2.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the
spray head back and forth;
3.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180° and spray it
again.
4.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray
head for about 3 seconds, clear the spray head to prevent the nozzle from sticking.
Finishing work
1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours;
2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
Ending working
1.After spraying, it should be placed in a clean and ventilated environment for about 12 hours.
2.If it is not sprayed, the remaining material needs to be kept away from the light, and avoid being near fire sources.
Technology Specification
| Parameter | Unit | In 23 ºC and 60% relative humidity | |
| Paint film appearance | - | The color is uniform and smooth | |
| Drying time |
Surface dry | Minute | <15 |
| Actual dry | Minute | <12 | |
| Hardness | Level | ≥HB | |
| Adhesion | Level | ≤2 | |
| Rate of spray | % | ≥97 | |
| Internal pressure, 50ºC | MPa | About 0.7 | |
Remark: all the above data are obtained from our laboratory tests according to BB/T 0047-2007 "Aerosol Paint" standard, the test results depend on external conditions, use methods and tools. In order to achieve better use effect, it is recommended to strictly follow the method of use.
The solution of normal problem
1.Paint film whitening: it is recommended to avoid the following day after rain (especially high
temperature and wet weather) and continuous rain.
2. Shut up: shake evenly and spray for 3 seconds or change nozzle.
3. Spray up: low temperatures suggest using 50 ºC warm water to heat up, one-time finish spray,
spray avoid angle 45 degrees;
4. Flow: use the correct spraying distance (15-25cm) and spray movement speed (30-60cm/s) to
avoid a thick spray.
5. Bite bottom: remove the bottom part of the bite, fill the bottom ash, and then spray the paint after
the coating is dry and flat.
Attention
1.Keep away from children, please work in the air. If swallowed, you should immediately cause
vomiting and seek medical advice.
2.Spray must be kept in aerosol cans are vertical and horizontal angle of no less than 45 °.
3.Flammable, pressure vessel, do not use near fire source.
4.The weight changes over time, which is normal, and the attrition rate is less than 2% per year.
